phase8/companion application
Contents
[Software Details (Ver. 1.0)]-The phase8 companion application is a web-based application that works on Google Chrome on macOS and Windows when connected to the phase8 via USB.
-The phase8 companion application allows you to save data stored on the phase8 to your computer, as well as edit parameter settings and sequence data. It also enables you to update the firmware version and perform a factory reset.
[Important Notes]
-Please use a Google Chrome browser to run this application for the ideal performance. Other browsers that support Web MIDI may also work but functionality is not guaranteed.
-Use this application while the phase8 is connected via USB cable. If you disconnect the USB cable directly, the phase8 may not return to its normal operation. In that case, hold the POWER button on the device to turn it off, then turn it back on to restore it.
-Connecting to the phase8 via an external MIDI interface device via the phase8's TRS MIDI IN/OUT jacks is not supported.
-To use this application, you must set the MIDI device permissions for the phase8 companion application URL to "Allow", in Google Chrome settings. If you are asked to allow a MIDI device connection when starting the application, please allow it.
-The Auto Power OFF function on the phase8 still works while this application is connected to the unit. When the function is enabled, the unit will automatically power off after a period of inactivity, causing the connection to be terminated. Please be aware that any unsaved changes on the phase8 will be lost when this occurs.
-When quitting the application, save your edited contents and then close the browser page. Be aware that if you close the browser or switch to another page while running this application without saving your edits, they will be lost.
-Do not launch the application in multiple tabs at the same time. This may result in a malfunction.
-The application does not work with the phase8 system versions earlier than 1.3. Please update the system version to 1.3 or higher. phase8 can be upgraded to system version 1.3 or higher using the phase8 companion application itself.